438,50 €
Prices without VAT
SP1000I-12
NDS
12V / 220V pure sine wave inverter with IVT 12V-1000W function
SMART-INPURE with IVT function is a range of inverters with an integrated priority system (Priority Switch type). This special IVT function, through the two 230 V input and output sockets, allows the management of the voltage coming from the inverter
connected to the battery and from the external network. When the external network (grid) is connected to the system, it will have priority in order to preserve the battery; when instead it is disconnected, the inverter will power the 230V output socket
and the entire system connected to it.
SMART-IN is the range of 12 V 220 V pure wave and modified wave inverters (or 24 V 220 V for some models) which stands out for its construction quality and design. Designed to ensure high performance, maximum safety, reliability and above all quiet operation,
which is important for those who install the inverter inside the passenger compartment. Thanks to the adoption of some special engineering solutions, SMART-IN inverters are also suitable for professional use.
SMART-IN can be used as inverter air conditioners, inverter air conditioners, and above all in the pure wave version to power all the most refined electronics, such as televisions, PCs, and all professional and health equipment.
SMART-IN inverters can boast self-consumption among the lowest on the market and considering that very often an inverter remains in stand-by mode, thus continuing to consume current, minimizing this absorption is fundamental and of great benefit for the
user who it will not drain the battery unnecessarily.
Totally isolated input and output, to prevent any anomaly of the equipment connected at the output from damaging those at the input or vice versa, allowing a high degree of safety. Professional connectors which, unlike the cheap inverters commonly on
the market, are integrated directly into the board, allowing a substantial reduction in the voltage drop on the connection between the device and the battery, improving its efficiency and with the same power consumption of a 230 user. V (for example
a TV) there is a lower consumption on the battery compared to classic inverters.
High frequency system
High efficiency up to 93%
Low self-consumption
Input with professional connectors
Predisposition for remote On / Off control
Fully isolated inlet and outlet
Priority function
Relay change time from inverter to 230VAC external network = 20 ms
Relay change time from 230 VAC to external network = 100 ms
Input voltage: 12V
Continuous power: 1000W
Pico power: 3000W
Output voltage: 230 VAC
USB outputs: 5V, 2.1A
Cables included: 16 mm2 length. 80 cm
product dimensions: 305 x 270 x 108 mm
pieces in the package: 1 pc
